open box to check
Please unpack and remove the instrument and accessories carefully. Check all materials
Packing List.
Check the oximeter for any mechanical damage.
Check for exposed wires, sockets, and accessories.
If you have any questions, please contact the supplier immediately.
warn
Make sure to keep packing materials out of the reach of children.
Disposal of packaging materials should be in accordance with your local requirements.
notes
Please save the box and packing materials for future shipping and storage.
Connecting the SpO2 Sensor
You can connect the SpO2 sensor to the oximeter by simply plugging its connector into
Top side panel of the oximeter
Power-on
Press and hold the On/Off button for more than 3 seconds to turn on the oximeter, LCD display
The front panel lights up, and the screen displays the SpO2 and PR parameter monitoring interface.
display and operation
The oximeter screen (display area) can display monitoring parameters. buttons on the front panel
Operate the oximeter below this screen. Please refer to Figure 3-1 and Table 3-1 for details of the keys.
5.1 Power on and off
Press and hold the On/Off button for more than 3 seconds to turn on the oximeter. LCD lights up
The front panel and screen display appears. When the oximeter is on, press the on/off button to turn it off
Oximeter.
notes
The oximeter is powered by a 3.7V lithium rechargeable battery. Oximeter may malfunction if battery is low
is opened. The battery should be charged for the machine to work.
In Spot operating mode, if the SpO2 sensor is disconnected, or the SpO2 sensor is connected, but
Take your finger off the sensor and the oximeter will automatically go into standby mode. In this mode,
When the SpO2 sensor is connected and a finger is inserted into the sensor, the oximeter will automatically
Restore operating mode. Otherwise the oximeter will automatically turn off within 3 minutes.
Post time: Sep-26-2022